Entry level press Made in Germany
This transfer press is not only the ideal device for professional entry into the world of textile printing. Even for already experienced textile finishers, this transfer press is a cost-effective alternative, without great loss of quality. We have made it our task to develop a reasonably priced device which nevertheless meets the very high demands of the customer. With this transfer press all possible transfer tasks can be accomplished.
Thanks to a quick-change device, the worktops can be exchanged in just a few seconds without any tools at all. Because the worktops are free-standing, the textiles can be easily pulled on, so that only the cut-out to be printed lies on it. This results in the following advantages:
- Transfer prints on the reverse side are protected
- no pressure wrinkles
- Prints don't go through
In addition to the standard worktop sizes, we also manufacture custom sizes!
Electrics and display:
The temperature and time can be set and read easily, quickly and uncomplicatedly on our clear display
Fast heating as well as an even and constant temperature is guaranteed thanks to the latest Mikanit heating foil technology. Our heating plates, which we manufacture ourselves, are supplied with a Teflon cover as standard, which is fastened with a clamping device and can be replaced by the customer himself at any time.
In addition to the standard heating plates, we also manufacture custom sizes!
The Teflon protection for the heating ensures, as the name suggests, that the heating plate is protected against dirt such as glue residues or paint. In addition, the Teflon is very easy to clean or, in the worst case, can simply be replaced by a new one.
A Nomex nettle cover protects the worktop or silicone rubber. The cover also ensures that the textiles slide better over the worktop when pulled on. It can be washed or also replaced.
The silicone rubber on the worktop contributes significantly to the printing result. Due to the meanwhile very varied printing possibilities you get different results with hard or softer silicone rubber layers. As we do not glue our pads to the worktops, the silicone rubber can also be exchanged for another at any time. A medium-hard one is delivered as standard. However, you can also order a soft and a hard silicone rubber from us.
How it works
During pressing, the pressure arm engages automatically by the toggle lever principle. The pressure can be adjusted by means of an easily accessible knurled screw. When the set time has elapsed, an acoustic signal sounds, so that the time of unlocking cannot be overheard. The gas spring technology means that you have to lift the lever arm about 3cman and the press opens automatically. The temperature and time can be easily set and read on the clearly
arranged displays of the regulator and the clock.
Heating and worktops
The latest Mikanit heating foil technology ensures rapid heating and a uniform and constant temperature.
All our heating plates which we manufacture ourselves are supplied with a Teflon cover as standard. Our worktops also have a silicone rubber and a Nomex nettle cover which can be renewed at any time.
In addition to the standard dimensions of the heating and worktops, we also manufacture your very special desired size!